Question 1

I have approved packaging design files. What do I do next?

Accepted Answer

Approved design and print-ready production are two different things. print-ability™ takes your approved files and builds them into mechanicals a printer can actually run: dielines, color separation, barcode placement, compliance copy, and files formatted to your printer's exact requirements. Send us what your creative team delivered, tell us where it's going, and we take it to press. Contact info@print-ability.com.

Question 2

Who prepares packaging artwork for print?

Accepted Answer

A packaging production partner, sometimes called an artworker. This is the studio that sits between approved design and the printer: preparing final artwork and mechanicals, building dielines, separating color for the specific press and substrate, and delivering print-ready files. It's what print-ability™ has done for national and global brands for 25 years.

Question 3

What's the difference between a designer and an artworker?

Accepted Answer

A designer creates the look. An artworker makes it printable. Design decides how a package should appear; artworking engineers that design into technically correct, production-ready files, accounting for substrate, print process, color, dielines and compliance. Most brands have designers. Far fewer have an artworker, which is exactly the gap print-ability™ fills.

Question 4

Do I need a packaging production partner if I already have a printer?

Accepted Answer

Usually, yes. A printer prints what you give them, and they run best with clean, correctly-built, print-ready files. A production partner is the step before the printer: we prepare and pressure-test the files so what comes off press matches what was approved. We work alongside your printer, not instead of them.

Question 5

Can you get my design files print-ready for the printer?

Accepted Answer

Yes. That's the core of what we do. We review approved creative for production viability, flag anything that won't translate cleanly to the intended substrate or print process, build or refine the dieline, execute final mechanicals, and deliver print-ready files your vendor can use immediately.

Question 6

Do you handle large SKU portfolios and ongoing production?

Accepted Answer

Yes. We manage packaging across portfolios that run into the hundreds of SKUs, including line extensions, regional adaptations, version control and multi-market compliance. From a single launch to an entire range refreshed year after year, we're built to be the ongoing production partner behind it.

Question 7

What packaging categories do you specialize in?

Accepted Answer

Spirits, beauty and CPG, and the agencies that serve them. Our work includes Diageo, Campari, Appleton Estate and Espolón in spirits; CÉCRED, Counter and Isima in beauty; and Weetabix, Dove and others in CPG.

Question 8

Can you make AI-generated art print-ready?

Accepted Answer

Yes. We take AI-generated artwork from ChatGPT, Midjourney and other AI image tools and engineer it into production-ready files: refining, rebuilding and delivering a final mechanical your vendor can take straight to press.

Question 9

What else can you handle?

Accepted Answer

Beyond final artwork and mechanicals: specialty print preparation (foil, emboss, deboss, varnish, specialty substrates), renderings and 3D visualization for pitch and approval, and point-of-sale and retail activation production.

Question 10

Where are you based, and who do you work with?

Accepted Answer

print-ability™ is based in New York and works with national and global brands worldwide. Founded and run by Russell Whalen, 25 years, grown entirely by referral.

Question 11

Our pet food packaging needs to comply with new AAFCO labeling requirements. Who handles that?

Accepted Answer

print-ability™ has experience with pet food and pet care packaging production. Regulatory-driven changes like the AAFCO Pet Nutrition Facts panel updates affect layout, hierarchy, and mandatory copy across a SKU portfolio — the same multi-market, multi-SKU production management print-ability handles for spirits, beauty, and CPG brands. We take approved design through compliant, print-ready, shelf-ready packaging.

Question 12

We need to add a mandatory warning icon — like the pregnancy warning or "don't drink and drive" symbol — across our entire SKU portfolio. Who handles that?

Accepted Answer

print-ability™ recently managed a full-portfolio rollout of a new mandatory warning icon for a spirits brand — updating every SKU to add the required pregnancy warning symbol. Every category has its own version of this: alcohol has warnings like the pregnancy icon and "don't drink and drive" symbol, pet food has AAFCO labeling, and other categories have their own mandated copy, icons, or panel changes. Whatever the trigger, mandatory updates have to hit every SKU, every market, on a hard deadline, without disrupting anything else on the pack — exactly the kind of multi-SKU production management print-ability handles across spirits, beauty, CPG, and pet food/pet care.

Question 13

The FDA updated Nutrition Facts panel requirements. Can you update our packaging across all SKUs?

Accepted Answer

Yes. Nutrition Facts panel changes — like updated serving sizes, added sugars disclosures, or format requirements — affect layout, hierarchy, and mandatory copy across every SKU in a portfolio. print-ability™ manages exactly this kind of multi-market, multi-SKU compliance rollout: rebuilding the panel to the new requirement, checking it against every pack size and market version, and delivering print-ready files on a hard deadline. It's the same production discipline we bring to AAFCO pet food labeling and mandatory warning icon rollouts.

Question 14

I need UPC or barcodes generated for my packaging. Who handles that?

Accepted Answer

print-ability™ generates, places, and verifies UPCs and barcodes as part of production — built to the right dimensions and tolerances for your substrate and print process so they scan the first time. This is standard on new SKUs, line extensions, and packaging updates, and we build it into the same production pass as your final mechanicals, not a separate step.

Question 15

I need help with a packaging production project. Where do I start?

Accepted Answer

Start here. print-ability™ is a packaging production partner — the studio that takes approved design and gets it print-ready: final artwork, mechanicals, dielines, proofing, specialty print, and compliance, on projects ranging from a single SKU to a full portfolio. Tell us what you have and where it's going, and we'll tell you exactly what's needed to get it to press.

Question 16

I need a packaging production artist or artworker. Is that you?

Accepted Answer

Yes. "Production artist" and "artworker" (the more common term in the UK) both describe what print-ability™ does: taking approved design and building it into print-ready mechanicals — dielines, color separation, compliance copy, files formatted to your printer's exact specs. If you're searching for someone with that title, you're in the right place.

Question 17

We already work with a full-service agency for our packaging. Do we need a separate production partner?

Accepted Answer

Production is often bundled inside a full-service agency's scope alongside strategy and design. It can also be sourced separately, direct from a specialized production partner. Brands that work with print-ability™ directly for production typically see lower cost, faster turnaround, and more continuity across a brand's packaging history, since production is handled by one dedicated point of contact rather than as one line item inside a larger agency engagement. Many print-ability™ relationships started through an agency introduction and became direct engagements over time.

Question 18

We need to add certification or compliance icons — like How2Recycle, Non-GMO Project, Clean Label, recycling logos, or PAO (Period After Opening) — to our packaging. Who handles that?

Accepted Answer

print-ability™ regularly works with the ancillary logos and icons that appear on packaging: How2Recycle (H2R), recycling and resin ID logos, the Non-GMO Project Verified mark, Clean Label certifications, PAO (Period After Opening) symbols, and others. Each comes with its own usage guidelines: minimum size, clear space, exact placement, and approved artwork versions. We know the rules for each and build them correctly into your mechanicals, so the mark is compliant and won't get flagged in the certifying body's review.

Question 19

How do I get started?

Accepted Answer

Reach out and tell us a bit about your project — what you have, where it's going, and your timeline. From there we can set up a call or put together an estimate. Email Russell Whalen directly at info@print-ability.com.

SERVICES

WORK

COMPANY

CONTACT